Practical Guide to COSHH Cleaning Records
A missing safety data sheet, an unlabelled spray bottle or an out-of-date risk assessment can create an avoidable problem long before a cleaning task begins. This guide to COSHH cleaning records explains what facilities teams and cleaning providers should keep, why each document matters, and how to make records useful at site level rather than simply filing them away.
For offices and commercial premises, COSHH administration is often shared between the client, facilities team and cleaning contractor. Clear ownership is therefore essential. The aim is not paperwork for its own sake. It is to show that hazardous substances have been identified, controls are understood, operatives have been instructed, and the workplace can respond properly if something goes wrong.
What COSHH cleaning records are designed to prove
COSHH – the Control of Substances Hazardous to Health Regulations – applies to products and substances that may cause harm through exposure. In commercial cleaning, this can include disinfectants, descalers, toilet cleaners, degreasers, floor-treatment products, aerosols and certain products used for specialist cleaning.
A good record system provides a practical line of evidence. It should enable a manager to answer straightforward questions quickly: what product is in use, where is it used, what are the risks, what controls apply, and have the people using it received suitable instruction?
The right records also support consistency across shifts and changing teams. This matters in occupied offices, multi-tenanted buildings and specialist areas where cleaning is carried out outside normal working hours. An operative should not have to rely on memory or informal handovers to know how a product is diluted, stored or used safely.
The essential guide to COSHH cleaning records
There is no single universal COSHH folder that suits every workplace. The records required will depend on the substances used, the tasks undertaken, the people who may be exposed and the building itself. However, a well-managed commercial cleaning operation will normally maintain the following connected documents.
A current chemical inventory
The inventory is the starting point. It lists the cleaning chemicals held or used at the premises, including the product name, supplier, intended use, storage location and, where helpful, the date introduced or reviewed.
Keep it specific to the site. A generic catalogue of every product a contractor can supply is less useful than a record of the products actually present in the cleaning cupboard, janitorial store or mobile cleaning trolley. The inventory should also account for products brought in for periodic work, such as carpet extraction, hard-floor maintenance or post-build cleaning.
Safety data sheets
Safety data sheets, often called SDSs, provide the manufacturer’s technical information about a product. They set out hazards, safe handling measures, first-aid actions, storage requirements, personal protective equipment and disposal guidance.
The data sheet does not replace a COSHH assessment. It informs it. A cleaning supervisor or competent assessor must consider how that product will be used at the particular premises. For example, a descaler used occasionally in a well-ventilated washroom presents a different exposure picture from the same product used repeatedly in a confined plant-room wash area.
Use the latest version supplied by the manufacturer or supplier, and remove superseded sheets from the active file. Digital access can work well, provided operatives and managers can retrieve the information without delay when on site.
Site- and task-specific COSHH assessments
A COSHH assessment identifies the harm a substance could cause, who may be affected and the control measures needed to reduce exposure. It should cover the product and the task, not merely repeat the wording from an SDS.
For cleaning activities, the assessment should address dilution, ventilation, contact with skin or eyes, the possibility of splashes, incompatible products, access by building users and arrangements for storing chemicals securely. It should state the required controls clearly, such as using a dosing system, wearing specified gloves, displaying wet-floor signage or keeping doors open while a product is in use.
Assessment records should be proportionate. A low-hazard ready-to-use glass cleaner will not need the same depth of control as a corrosive toilet descaler or concentrated disinfectant. The assessment must still be clear enough for the people carrying out the work to follow.
Training and instruction records
Training records demonstrate that operatives have received appropriate COSHH instruction and understand the procedures relevant to their duties. A signed attendance sheet alone is not always enough. The record should identify the training topic, date, trainer, attendees and any practical instruction provided.
For a cleaning team, practical points often matter most: never mix chemicals, use the correct dilution, check labels before use, wear the supplied protective equipment, report damaged containers and know what to do following a spill or splash. Refresher training should follow when products, processes or risks change, and where supervision identifies a gap in practice.
Inspection, issue and maintenance records
The safest written procedure can fail if equipment does not support it. Where the control measure relies on a dilution station, chemical dispenser, locked cabinet, extraction equipment or reusable protective equipment, inspections and maintenance should be recorded.
A simple routine check can confirm that containers are labelled, no decanted product is left unidentified, safety data sheets remain available and incompatible products are separated. Records of stock issue can also help prevent unauthorised substitutions, particularly where several cleaning teams work across a large building.
Incident, spill and health-surveillance records where applicable
Spills, near misses, skin irritation and accidental exposures should be reported and investigated. The resulting record should identify what happened, the immediate response, whether first aid was required and what changes will prevent a repeat. If an incident reveals that a control is impractical, unclear or routinely missed, update the assessment and brief the team.
Health surveillance is not required for every cleaning product or task. It may be appropriate where there is a recognised risk that cannot be adequately controlled by other means, such as work involving respiratory sensitisers or substances linked to occupational dermatitis. Seek competent health and safety advice where this is a possibility.
Making records work across client and contractor teams
Commercial cleaning contracts can create uncertainty about who keeps which documents. The employer of the cleaning operative has clear duties to protect its staff, while those managing the premises must provide relevant information about site-specific risks, restrictions and emergency arrangements. In practice, both sides need an agreed process.
A contractor may maintain product assessments, training records and staff competence evidence. The facilities team may hold building emergency information, details of ventilation constraints, storage rules and any restrictions around sensitive areas. These documents should be reviewed together where they affect the cleaning task.
This is particularly relevant in server rooms, secure offices, clinical-style environments or properties undergoing refurbishment. A chemical that is suitable for general washroom cleaning may not be acceptable near sensitive IT equipment, natural stone finishes or areas with limited ventilation. Cleaning records need to reflect these operational realities.
Review triggers that should not be missed
COSHH records are live controls, not documents to review only at contract mobilisation. Review them on a planned basis and whenever there is a meaningful change. That could be a new chemical supplier, a revised product formulation, altered cleaning hours, a move to electrostatic disinfection, an incident, new equipment or feedback from operatives.
It is also sensible to review records when a building changes use or occupancy. A previously quiet office may become a busy hybrid workplace, increasing the need to manage access to cleaning areas and prevent contact with chemicals during daytime cleaning.
Version control is central to this process. Each assessment should show its issue date, review date and responsible person. Withdraw old copies from cleaning cupboards and team folders so that there is one current instruction in circulation.
Common gaps that undermine otherwise good systems
The most frequent weaknesses are simple but significant: products transferred into unlabelled bottles, generic assessments copied between sites, expired safety data sheets and instructions written for managers rather than operatives. Another common issue is treating PPE as the only control. Better controls may include selecting a less hazardous product, supplying it ready to use, improving ventilation or changing the method of application.
Paper records can be entirely suitable, especially on smaller sites, but they need to be legible, current and accessible. Digital systems make updates and audit trails easier, yet they only improve compliance if supervisors and operatives can use them during the working day. The best format is the one that supports reliable practice on site.
For facilities managers, the value of organised COSHH cleaning records is confidence: confidence that cleaning teams have the right information, that risks are controlled consistently and that evidence is available when it is needed. A capable cleaning partner should make that process easier through trained operatives, clear documentation and regular quality checks, leaving your team free to focus on the wider performance of the workplace.